TH 2-cavity pet blow molding machine for mineral bottles
a.High Innovation:
1),Cooperation with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three parts in
the air pressure diagram of the machine;
2),Unique design of the position of valve to make the air pressure diagram of the machine would be easier to understand;
3),Strong clamping force with high pressure and double crank links to lock the mold tightly;
4),Ideal effect of the chilling with the chilling system;
a.8.High environmental protection: No contamination and low noise with the air cylinder to drive the action instead of the oil pump;
a.9. High convenience:
1),Two ways of operating: automatic and manual;
2),Low cost (lower consumption of electricity,air and water), high
efficiency, easy operation, easy maintenance, etc, with automatic
technological process;
3), Easy installation and starting;
a.10.High Quantity: Low rejection rate: less than 0.2 percent.
| TYPE | ITEM | UNIT | TH-A2 |
| CONTAINER | Theoretical output | Pcs/Hr | 2000 |
| Max.container volume | L | 2L | |
| Max.neck diameter | MM | 38 | |
| Max.container diameter | MM | 105 | |
| Max.container height | MM | 350 | |
| Number of cavity | Cavity | 2 | |
| ELECTRICAL SYSTEM | Actual power consumption | KW | 15 |
| Heating power | KW | 30 | |
| Actual total power | KW | 33 | |
| AIR SYSTEM | Operataiting low pressure | Mpa | 0.7 |
| Low pressure consumption | M3/min | 0.6-0.8 | |
| Blowing pressure | Mpa | 3.5 | |
| High pressure consumption | M3/min | 2-3 | |
| CHILLER WHATER | Operating pressure | Mpa | 0.3-0.5 |
| MACHINE | Machine dimension | M | 2.4x1.5x1.9 |
| Machine weight | Kg | 2200 |
